Note: This page has moved to https://eblocker.org/en/docs/how-do-i-set-up-port-forwarding-on-the-router

How do I set up port forwarding on the router?

To set up port forwarding, you must be logged into the router's user interface. Some routers also require the "extended view" to enter port forwarding.

In the following we have described how to create a port forwarding for the most common routers. Please note that the description may vary slightly. In this case, read the instructions of your router or check the FAQs of the router manufacturer.

Fritzbox:

Select „Erweiterte Ansicht“
Menu Internet > Shares > tab "Portfreigaben"
Click on the button „Gerät für Freigaben hinzufügen“
Select eBlocker
Click on the button „Neue Freigabe“
Click on port sharing
Select „Andere Anwendung“ in the „Anwendung“ tab
Choose a name (for example: eBlocker Mobile)
Protocol = UDP
Port to device = 1194
External port required = from 1194 to 1194
Click on „Freigabe aktivieren“
and click on „OK“

TP link:

Menu Forwarding > Virtual Servers
Button „Add New... “
Service port = 1194
Internal Port = 1194
IP Address = the IP address of your eBlocker
Protocol = All
Status = Enabled
Click the „Save“ button

TP link (alternative version):

Advanced menu > NAT Forwarding > Port-Triggering
Button „(+) Add“
Applikation = freely assigned (for example: eBlocker Mobile)
Triggering Port = 1194
Triggering Protokoll = UDP
External Port = 1194
External Protokoll = UDP
Enable ths entry = (set checkmark)
Click on the „OK“ button

Netgear:

Select the "Advanced" tab
Menu Advanced Setup > Port Forwarding/Port Triggering > click on the „Add Custom Service“ Button
Assign service name freely (for example: eBlocker Mobile)
Protocol = UDP
External starting port = 1194
External Ending Port = 1194
Check „use the same portrange for the internet port“
eBlocker Enter IP address or select the eBlocker from the list of devices
Click on the „Apply“ button

D-Link:

Select the „Advanced“ tab
Select „Virtual Servers“ from the menu
Activate the first unused virtual server
Now assign a name (for example: eBlocker Mobile)
Public= 1194 to 1194
Protocol = UDP
Enter the IP address of your eBlocker at „Virtual Servers“
Private = 1194 to 1194
Click on the „Save settings“ button

Apple Airport:

Start the macOS Airport Utility
Select the tab "Network"
Click the "+" button at "Port Settings"
Add a name like "eBlocker Mobile" in the filed "Description"
Use Public TCP and UCP port 1194
Input your eBlockers IP-Address in the "Private IP Address" field
Use Private TCP and UCP port 1194
Click on the button "Save"
Click on the button "Update"

Asus Router:

Start the Asus Merlin Software
Select "Advanced Settings" > "WAN" > "Port Trigger" tab
Click the "yes" radio button
"Description": Enter a short name e.g. eBlocker
insert 1194 in the field "Trigger Port" and also 1194 in the field "Incoming Port"
choose UDP in both "Protocol" dropdown menus
Click "Apply"

Speedport W724V

Tab „Internet“ > Menu „Port activation“
click on the button „Create other UDP redirection“
insert 1194 in the fields
choose the eBlocker or his IP-Address from the Dropdownfeld
and click on the „SAVE“ button